Part 1 - Measuring Without Placing a Probe and Measuring Things That Haven't Been Built Yet

Nombre de vues 2,676

The Infiniium real time scope with InfiniiSim de-embedding software allows you measure signals wherever you want, not just where you can place a probe easily. But to do this, you need the s-parameters between the probe and the point of interest. The s-parameters could come from measurement, but this reopens the problem of getting a probe on the point of interest. The first part of this paper shows how you can use 3D geometry, material properties, and electromagnetic simulation to create the de-embedding information even for points of interest that are inaccessible. In the second part of the paper we'll show how to explore the design space without the expensive and time consuming "cut and try" method of building and measuring many different prototypes. We'll show how to use measured data from hardware that has been build and use simulation with EDA tools to quickly and cheaply determine the characteristics of candidates that haven't been built yet. For more information: http://www.agilent.com/find/eesof-si-solutions For a free evaluation copy of ADS: http://www.agilent.com/find/eesof-ads-latest-downloads

Vidéos liées

Part 2 - Measuring Without Placing a Probe and Measuring Things That Haven't Been Built Yet 08:28

Part 1 - IBIS AMI Model Generation Made Easy 11:44

Part 1 - What's New for Signal Integrity in ADS 2009 Update 1 07:49

Part 1 - Signal Integrity Design Using Fast Channel Simulation and Eye Diagram Statistics 06:12

IC layout (part 1) 09:55

Video 1 of 5: PCI EXPRESS® 3.0 Introduction and Overview 06:10

S-Parameter Simulation in Advanced Design System 09:53

Part 3 - Measuring Without Placing a Probe and Measuring Things That Haven't Been Built Yet 09:15

Einstein's Theory Of Relativity Made Easy 08:30

"An Eye Is Born" by EyeKnowHow 02:56

Manual Design of Inverter IC Layout (part 2/2) 10:00

CNC USB Controller - homing and tool length procedures 02:42

USB 3.0 DesignCon2011 part 4: Compliance and Validation Testing 05:28

S-Parameters: Microwave goes Mainstream for High-Speed PCB Design 01:36

Maxwell's Equations 01:52

Part 1 of 4, Generating X-Parameter Models from Circuits 06:56

JamJar Pulse Jet Engine - Home Made 01:26

Lec 14 | MIT 8.02 Electricity and Magnetism, Spring 2002 50:24

Agilent InfiniiSim De-embedding Demo 12:13

Agilent ADS Channel Simulator Webcast HD Preview: Part 1 06:12

Part b - The Momentum 3D Planar EM Simulator in Advanced Design System 09:01

Part a - Eye Closure Solutions and Channel Simulation in ADS 09:00

Lec 4 | MIT 6.002 Circuits and Electronics, Spring 2007 49:06

How to Make Better Current-Voltage Measurements 05:12

Displacement Current Example 2 09:59